IC200GBI001-EF Genius Network interface unit Supports installation of up to eight (8) racks

IC200GBI001-EF GE Genius Network Interface Unit (NIU)
Brand :GE
Model :IC200GBI001-EF
Additional information: Genius Network Interface Unit (NIU)
Estimated shipping size
Size :263x58x28mm
Weight :43kg original
Origin: USA
The IC200GB1001 is a VersaMax communication module. This module is the Genius network interface unit that allows the VersaMax /0 module to be installed in a distributed I/O architecture. The module is designed to accommodate up to eight per rack
(8) I/O modules, bottle holding up to eight (8) racks, enough to support up to 64 I/0 modules. It supports transmission speeds of 153.6kbaud in extended network configurations: 153.6kbaud, 76.8 in standard configurations
Kbaud and 38.4 Kbaud,
The IC200GBI001 can accommodate a large number of I/0 points, specifically, discrete inputs can accommodate up to 1024 points; 1024 discrete outputs; 128 bytes analog analog input memory and 128 bytes analog output memory. This module
The block can manage network input scans of 128 bytes per scan and output scans of 128 bits per scan. Its power consumption is 250 mA @ 4VDC and 10 mA @ 3.3mA.
The IC200GB1001 is compatible with various controller systems, as both previous and modern controller platforms support the Genius protocol. Compatible control systems include columns 90-70 and PACSystem RX7i and PACSystem RX3i.
The appropriate firmware version must be loaded into the controller and IC200GB1001 Genius network interface module.
The IC200GBI001 is equipped with dual Genius connection terminals. The upper terminal is used as the primary Genius connection point, while the lower terminal is used as a redundant port. These ports are designed to be connected in a Daisy chain topology with terminations installed at both ends of the communication cable
End resistor. The appropriate resistance values on the terminals in rows 1 and 2 are 75, 100, 120, or 150 ohms.