IC693MDL741 Programmable logic controller Supports negative logical connection configuration

Brand GE Fanuc
Series 90-30 series
Maker General Electric Fanuc; Emerson Automation (Current)
Part number IC693MDL741
Series 90-30 series
The IC693MDL741 is part of Emerson Automation's 90-30 series Programmable Logic controller (PLC) platform, which was previously from GE Fanuc. The module is a discrete output module and supports negative logic wiring configuration. The module is equipped with sixteen (16) output LED indicators that describe the operating status of each channel of the module. The IC693MDL741 offers output voltage ranges from 12 to 24 V DC, +20% and -15%. It has output current ratings of 0.5 amps per point and 2.0 amps per common, while output packets are eight (8) channels per group. This module does not come with individual channel isolation, but provides group isolation. The rated voltage for inter-group isolation is 500 V, and 1500 V between the field side and the logical side, or optical isolation. The module also provides a module insert where the user can provide a short written description of the assigned output. The IC693MDL741 is installed on the 90-30 series baseplate and occupies one slot. It can act as a local output component, installed with the CPU backboard, or as a distributed I/O module component. The module's output features include a 0.5V pressure drop, 1 mA off state leakage, and a maximum signal on/off response time of 2 ms. When all outputs are energized, the IC693MDL741 consumes 110 mA of current from the 5VDC backplane. The IC693MDL741 is capable of energizing electrical loads such as motor starters, solenoids, indicators and signalers. It can also be used with AC loads, provided that a plug-in relay is installed between the two.

The 16-point IC693MDL741 module is an I/O module for GE Fanuc 90-30 series PLC. The module can be installed in any slot of a GE 90-30 series PLC with a 5-slot or 10-slot baseplate. The backboard is the foundation of the PLC on which all other components are mounted. When all points on the IC693MDL741 module are open, the module current drawn from the substrate is 110 mA. The voltage input of the module is 5 volts DC. The IC693MDL741 module does not contain any fuses.

The IC693MDL741 module is a 12 to 24 volt negative logic output module. The module provides 16 output points, divided into 2 groups, each group has a common output power terminal. Leds are provided on the module to indicate the off status of the output point. The IC693MDL741 module absorbs the current of the load into the negative power bus or the user's common power supply, so it has negative logic characteristics. Solenoids and indicators are some of the devices that can be used with the IC693MDL741 module. The output voltage ranges from 12 to 24 volts DC. Isolation of up to 1500 V is provided between the field and the logical side, and 500 V is provided between groups. Peak output voltage drop is 0.5V. Peak off state leakage is 1 MA. The module operates and stores at temperatures ranging from 0 to 60 degrees Celsius and -40 to 85 degrees Celsius, respectively.