140CPU67260  Universal industrial Ethernet absolute encoder with intelligent modular design

In recent years, the automation and digital integration of China's manufacturing industry has continued to develop, the main purpose of digital transformation is to improve enterprise efficiency, and the ultimate state of enterprise efficiency is to achieve comprehensive automation.

In more automation application scenarios, the control system is still based on the PLC controller as the center of automation control, and the networking and communication between various industrial automation equipment has shifted from the past fieldbus to industrial Ethernet.

Mainstream industrial Ethernet has also developed a number of other types. Shanghai Jingpu industrial Ethernet in addition to PROFINET, can also be extended to Ethernet/ IP, CC-link IEF Basic. If the supply chain is unstable and the customer changes to another PLC brand, our encoder can also achieve replacement.

The absolute value encoder is an indispensable core sensor for factory automation and digitalization. The encoder transmits various Angle and length data on the automatic production equipment to the PLC through the network signal. However, in the industrial control site in China, the electrical environment is complex, and it is necessary to do independent design for the use scenario in China.

The industrial Ethernet mechanical multi-turn absolute encoder of Shanghai Jingpu is not an imitation of foreign products, but an independent design of industrial Ethernet output according to the use scenario of Chinese users.
1, mechanical gear box, full magnetic design, not susceptible to field electrical interference, to ensure accurate and reliable data.
2, dual power supply design, anti-interference design, the use of brand dual power module, are isolated power supply, can effectively prevent power interference problems. It has the function of short-circuit protection and overvoltage protection, which can effectively prevent product failure caused by power supply problems.

3, the use of international standard sockets, communication socket types and wiring methods are consistent with international well-known brands, users do not need to change the wiring method to replace products, to achieve seamless replacement.
4. Parameters can be changed according to site needs
Encoder can be configured:

 single-turn resolution value, users can freely set according to needs.

 set value, the user can set any value, remote reset through the control command.

 Increase the value clockwise or counterclockwise according to the installation position of the encoder.

 encoder multi-turn, single-turn working mode.

5, the board is loaded with 3 indicators, yellow light can monitor the encoder to send signals, red power indicator light, green light for Ethernet/ IP working signal light, the user can judge the encoder working status through the light, greatly convenient on-site troubleshooting.

6, the use of hard decompression chip, the communication protocol is included in the chip, no programming and decoding, and PLC compatibility is better, communication is not easy to drop.

Mainstream industrial Ethernet has also developed a number of other types. Shanghai Jingpu industrial Ethernet in addition to PROFINET, can also be extended to Ethernet/ IP, CC-link IEF Basic. If the supply chain is unstable and the customer changes to another PLC brand, our encoder can also achieve replacement.