• 1783-SFP1GTE   GLX transceiver  Supports digital optical monitoring
  • 1783-SFP1GTE   GLX transceiver  Supports digital optical monitoring

1783-SFP1GTE GLX transceiver Supports digital optical monitoring

No.1783-SFP1GTE
Brand: Allen-Bradley/Rockwell Automation
Series: Stratix managed switches
Part Number: 1783 -SFP1GLX year
Description: Pluggable transceiver device
Range: 10 km
Wavelength: 1310 nm
  • 1783-SFP1GTE   GLX transceiver  Supports digital optical monitoring
Desciption
Brand: Allen-Bradley/Rockwell Automation
Series: Stratix managed switches
Part Number: 1783 -SFP1GLX year
Description: Pluggable transceiver device
Range: 10 km
Wavelength: 1310 nm
The 1783-SFP1GLX transceiver is a pluggable transceiver designed and manufactured by Allen-Bradley/Rockwell Automation. It is used to send and receive communication data through the use of a combined radio transmitter and receiver. It is a 1000 Base LX/LH single-mode fiber optic device belonging to the Allen-Bradley Stratix 8000/83000 series. It works at a range of 10 kilometers. It comes with 1 GB of memory. The transceiver has a core/cladding size of G.652 microns. It is certified to ROSTECHNADZOR and KC standards. The wavelength generated by the transceiver is 1310 N-m. It's small and easy to plug in. It comes with dual LC connectors and supports digital optical monitoring. Monitoring is done through the command line interface or CLI.

Allen-Bradley/Rockwell Automation 1783-SFP1GLX transceivers can only be used for industrial uses with temperature ratings between -40 and 85 degrees Celsius. After the module is installed, the overall rated temperature of the combined module is limited to the lowest rated temperature and the highest minimum rated temperature. The 1783-SFP1GLX transceiver is supported by a Stratix 2000 Gigabit Ethernet SFP slot. The 1783-SFP1GLX transceiver is used with Allen-Bradley 5700 series switches. These switches have an isolation voltage of 50 volts and have basic insulation. They also come with an RJ 45 Ethernet connector. Switches use 18 to 20 AWG solid or stranded copper wire, rated at 30 degrees Celsius or higher. The 1783-SFP1GLX transceiver has an open housing and should be protected from water spraying. It should also be away from EMC noise and electrostatic discharge power to ensure its long service life.

Mitsubishi Type Gu-d08 Thyristor Board 80173-109-01
A-B 1756-L63 BB ControlLogix Controllers CPU Module ControlLogix5563
A-B 1753-L32BBBM-8A GuardPLC 1800 24DC
A-B 80190-220-01-R Mitsubishi IGCT Module
A-B Touch panel 2711-B6C20 Panelview 600 HMI Module
A-B 80190-300-01-R Mitsubishi 8019030001R IGCT Module
A-B 1753-L32BBBP8A Allen Bradley PLC GuardPLC 1753L32BBBP8A
ALLEN BRADLEY 80190-560-01-R Controller Circuit Board
MITSUBISHI/A-B SCR 81001-450-53-R IGCT three-piece set 8100145053R