Manufacturer GE General Electric
Series Mark V
Part number DS200SIOCG1A
Function Description Instantaneous flow plate
Functional acronym SIOC Corporation
The GE VersaModular Eurocard (VME) Stand I/O board DS200SIOCG1A has 5 wire terminals for up to 33 signal cables. It also has a fuse and four 2-pin connectors. The wiring terminals on the I/O board DS200SIOCG1A of the GE VME support are labeled TB-1, TB-2, TB-3, TB-4, and TB-5. The signal carried by the wire is sent by the circuit board or received by the circuit board during processing. The wires are secured in place with screws to secure the wires in the terminals. An identifier is also printed on each terminal.
When replacing a board, you must first use each wire connected to the terminal using the ID tag assigned to the terminal to which it is connected. Then, when all power on the board is disconnected, you can loosen the screws holding the wires to the terminals. Check to make sure the label is connected to the wire and has the correct terminal ID written on it. Bend the signal wire to remove the old plate and install a replacement plate.
